Author name: RPL_User

Innovator Name : Siddhant Panjikar Contact No: +917276347926 Project Objective: With the help of this robot, easily and in fun way we can teach robotics to student Abstract: This robot is in comes as DIY kit. The body is make with 3D printing process. According to requirement, electric sensors are place inside the bot. This […]

Innovator Name : Rajay Naik Contact No: +919405505309 Project Objective: The drone will be used to do action photography Abstract: The drone has a 3 inch category frame made of carbon fiber and is capable of achieving 100km/hr speed. The drone is used to get action videos by going through places an average camera men

Innovator Name : Joyden Dsouza Contact No: +917620962667 Project Objective: To detect baby crying and send notification to parents mobile phone Abstract: The system detects the baby crying and sends notifications to parents that baby is crying and if the baby has peed in the cradle the notification goes to parents mobile phone. The parent

Contact No: +91 Project Objective: 3D PRINTED TOPOGRAPHY MAP OF GO Abstract: The map was divided into multiple segments and printed on the same 3d printer to avoid errordue to calibration. The map was later assembled and stuck together using adhesive and latermultiple spray paint coats were applied

Innovator Name: Ananya Naik and Swayam Kakodkar Contact No: +919850452792 Project Objective: This device can record the saline intake by patients and send it through mobile app Abstract: Consumption of saline by patients is record by this device, on the bases of weight reduction. This data is shared to patients relative via mobile app.

Innovator Name: Shivraj Naik Contact No: +917058400330 Email Id : shivrajnaik6110gmail.com Project Objective: To build Autonomous Robot Abstract: The robot is a Humanoid styled robot who’s body is made up of 3D printed PLA material, which runs on Arduino, Servo motors and the robot is pre-programmed to do certain operations like; walking, dancing etc.

Innovator Name: Shivraj Naik Contact No: +917058400330 Project Objective: To build smart robots with sensors to detect obstacles and avoid them Abstract: The robot build is an Octopus (6 Lags Robot/ Spider Bot). The robot’s body is 3D Printed using PLA material and electronics used are Arduino, servo motor driver and Servo motors Sensors for

Innovator Name: Siddhant Panjikar Contact No: +917276347926 Project Objective: Waste generated from 3D printers is crushed and used again Abstract: This machine will crush and make the old filament waste in to small granules. These granules will be heated to their melting point and is mixed with some new plastic grenuals. This mixture is then

Innovator Name: Vailan De Souza Contact No: +91: 9881253391 Project Objective: A machine for turning PET bottles into printable filament. Abstract: PETamentor is an innovative solution aimed at addressing the environmental challenges posed by plastic waste while simultaneously promoting sustainable manufacturing practices. This abstract provides an overview of PETamentor, focusing on its ability to convert

Unique Registration Number: GSIC-415 Innovator Name: Akhilesh Bhise Contact No: +917972447075 Project Objective: To create a virtual environment for Architectural designs Contact Email: akhileshbhisso@gmail.com Abstract: As we know that the construction designs are really vast in terms of planning and scheduling, we believe that the use of technology for construction design plays a vital role.